GTVault - Setup 7242 - RX-7 INFINI III(FC,J) by GTtuner14

Setup Information
If you like this setup, vote for it by clicking the thumbs up icon below. More information on the Setup Voting system can be found in the FAQ.

Setup ID Tuner Make Car Model Year Track Votes Views Horsepower Best Lap Date Entered Last Modified	7242 GTtuner14 Mazda RX-7 INFINI III(FC,J) 1990 Drift Setup 1 427 318 08/11/2008 4:32 PM

Equipment Selection
Muffler	Racing	Suspension	Full Customize
Racing Chip	Sports	Transmission	Full Customize
NA Tune	None	Clutch	Triple Plate
Front Tires	T1 - Simulation	Flywheel	Racing
Rear Tires	T1 - Simulation	Carbon Driveshaft	Equipped
Nitrous	N/A	GT Auto - Wing	N/A
Turbine Kit	Stage 1	Limited Slip	Full Customize
Intercooler	Racing	AYC	None
Supercharger	N/A	VCD	None
Brakes	Sports	Weight Reduction	None
Brake Controller	None	Increase Rigidity	N/A

Settings
Setup Item	Front	Rear	Setup Item	Front	Rear
Spring Rate	7.0	7.0	Stabilizer	3	5
Ride Height	100	116	Brake Balance
Shock Absorbers			Downforce	0.01	0.01
Shock Bound	7	8	LSD Init. Torque
Shock Rebound	7	7	LSD Acceleration
Camber Angle	2.0	2.0	LSD Deceleration
Toe Angle	0.0	0.0

Gear Ratios
1st	2nd	3rd	4th	5th	6th	Final	Auto Set
							30

Driving Aids / Other
ASM	TCS	AYC	VCD
2	1

This is already a classic as you may know and it handles fairly well. Can spin out if taken to an ultimate level but not easily. Sometimes when drifting a turn this car wil begin to edge toward the outer skirts of the turn. Whe this happens simply decrease throttle or shift down. I recommend taking it to mid-field for a test run to get use to it. I still haven't taken it to the other courses but will be l8ter and will have an updated setup for it by tommorrow. Comment on this and my other setups.