If you like this setup, vote for it by clicking the thumbs up icon below.

More information on the Setup Voting system can be found in the FAQ.
Vote for Setup 4954    New Setup for Chrysler Prowler      
Setup ID
Tuner
Make
Car
Model Year
Track
Votes
Views
Horsepower
Best Lap
Date Entered
Last Modified
4954
2002
Road Setup
3
552
447
 
02/25/2006 12:15 AM
 
Muffler Racing Suspension Racing
Racing Chip Sports Transmission Full Customize
NA Tune Stage 3 Clutch Triple Plate
Front Tires R3 - Medium Flywheel Racing
Rear Tires R3 - Medium Carbon Driveshaft Equipped
Nitrous None GT Auto - Wing None
Turbine Kit None Limited Slip Full Customize
Intercooler None AYC None
Supercharger None VCD None
Brakes Racing Weight Reduction Stage 3
Brake Controller Equipped Increase Rigidity None
Setup Item Front Rear Setup Item Front Rear
Spring Rate 11.5 9.5 Stabilizers 3 3
Ride Height 89 94 Brake Balance 5 3
Shock Absorbers Downforce
Shock Bound 5 6 LSD Init. Torque 10
Shock Rebound 7 6 LSD Acceleration 35
Camber Angle 2.3 1.5 LSD Deceleration 15
Toe Angle -1 Nitrous
1st 2nd 3rd 4th 5th 6th Final Auto Set
4.561 13
ASM
Oversteer
ASM
Understeer
TCS Ballast
Balance
Ballast
Weight
AYC VCD
  15
What is up with having cars you can not race with on this game? I decided to try the prowler out and was surprised. It was my understanding that the prowler has very uneven weight distribution because the tranny is by the rear differential. I figured that the car should have weight re-distributed to the front in order to compensate. When I tested as such, the car spun in every corner, so I moved the balance further back and now the prowler rides on a rail. Why is this so? Any comments would be most welcome. FYI, this set up runs 55's consistantly at Tsukuba.