GTVault - Setup 5420 - Charger Super Bee 426 Hemi by zblazers90

Setup Information
If you like this setup, vote for it by clicking the thumbs up icon below. More information on the Setup Voting system can be found in the FAQ.

Setup ID Tuner Make Car Model Year Track Votes Views Horsepower Best Lap Date Entered Last Modified	5420 zblazers90 Dodge Charger Super Bee 426 Hemi 1971 Drift Setup 0 409 735 06/01/2006 4:01 PM 06/01/2006 4:02 PM

Equipment Selection
Muffler	Standard	Suspension	Racing
Racing Chip	Sports	Transmission	Full Customize
NA Tune	None	Clutch	Triple Plate
Front Tires	R5 - Super-soft	Flywheel	Racing
Rear Tires	R1 - Super-hard	Carbon Driveshaft	Equipped
Nitrous	Equipped	GT Auto - Wing	None
Turbine Kit	None	Limited Slip	Standard
Intercooler	None	AYC	None
Supercharger	Equipped	VCD	None
Brakes	Racing	Weight Reduction	Stage 3
Brake Controller	Equipped	Increase Rigidity	None

Settings
Setup Item	Front	Rear	Setup Item	Front	Rear
Spring Rate			Stabilizers	4	4
Ride Height	137	132	Brake Balance	24	1
Shock Absorbers			Downforce
Shock Bound	8	8	LSD Init. Torque
Shock Rebound	8	8	LSD Acceleration
Camber Angle	2.0	1.0	LSD Deceleration
Toe Angle	0	0	Nitrous	30

Gear Ratios
1st	2nd	3rd	4th	5th	6th	Final	Auto Set
							10

Driving Aids / Other
ASM Oversteer	ASM Understeer	TCS	Ballast Balance	Ballast Weight	AYC	VCD
0	0	0	-50	200

alright basically this is a burnout setup heres how to get it going

1. press on nitrous and gas at same time. hold them
2.then press on brakes with analog stick, have the red brake bar boout 3/4-all the way up. hold that too
3. if u did it right this will smoke the tires all the down to the 100m line

i chose stock exhaust cause i mean come on, i dont want a 7litre 426 hemi sounding like a 4 cylinder

ENJOY!